Aimscorp 10,000 Watt Modified Sine Power Inverter 12vDC to 120vAC ETA 4/30

FEATURES : 

• 10000W max continuous power
• Modified sine wave with Pulse Width Modulation technology (soft start)
• Volt meter on front panel to monitor your battery voltage
• Amp meter on front panel to monitor your current use (rate at which battery is drained)
• Over Temperature LED indicator
• Over Load LED indicator
• AC direct connect terminal block
• On/off switch
• Over Temperature protection
• Over Load protection
• Single cooling fan thermally controlled
• Internally fuse protected
• AC output short circuit protection
• Auto reset on most fault conditions
• Aluminum case for optimal cooling
• Pre-wired for remote on/off switch
• Pre-slotted mounting plate
• Instruction manual
• Free 1 year tech support
• 1 Year Warranty Parts and Labor

SPECIFICATIONS :

• Continuous output power: 10000 Watts
• Surge power capability (peak power): 20000 Watts
• dc input / operating voltage: 10 to 16 Volts
• Output voltage: 120 Volts ac +/- 10%
• Output wave form: modified sine wave with phase correction
• Output frequency: 60 Hz +/- 1 Hz
• Battery low voltage alarm: 10.5 +/- 0.5 Volts
• Battery low voltage shutdown: 10.0 +/- 0.5 Volts
• No load current: < 1.8 DC amps
• Full load efficiency: 90%
• 1/3 load efficiency: 95%
• No load minimum operating temperature: 30ºF
• Full load maximum operating temperature: 140ºF (automatic shutdown)
• AC Output Socket Type: quadruple Type 2 -3 prong
• High input voltage protection: 15V-17V
• Low input voltage shutdown: 10V Internal fuse protection
• Product size (L x W x H): 21 3/8 x 7 7/8 x 6 inches
• Weight: unit 23.1 lbs. boxed 25 lbs.
• UL maximum recommended per outlet 1500W
• This inverter requires 2 sets of 4/0 AWT cable if you are going to run at 10000 watts.